(kgs)10/11 Propeller model(in):3 leaves/10.6 Packing size(cm):1075518. Choose 120A batteries, the maximum power of 2.5 hours of sustainable operation. The battery is not included. Please Read The Instruction Before You Use It.
We can only provide CE certification, there is no other certification can be provided, thanks for your understanding. HANGKAI 45LBS Thrust Electric Outboard Trolling Motor Boat motor for salt water.
Trolling Motor, Inflatable Boat Electric Fishing Motor, Thrust Electric Trolling Motor, Electric Board Motor, Boat Propeller. The marine electric thruster with a pure copper motor is more durable and highly efficient.
The Marine electric thruster can overcome huge water. To increase the speed of driving and improve its efficiency.Its angle, gear, and height can be freely adjusted. It is suitable for various styles of small watercraft, such as kayaks, canoes, dinghies, and inflatable boats.
The Marine electric thruster with a pure copper motor is more durable and has a long service life. The Marine electric thruster with a pure copper motor can overcome huge water. The suspension bracket is made of high-strength stainless steel, which can ensure that the bracket is not deformed by repeated disassembly and installation. When it collides with an object underwater, the design can protect the propeller that is running at high speed. With 45lbs of thrust, you'll be able to sneak up on fish at optimum speed.
The forward gears include five gears, and the backward gears include two gears. Its gears can be freely adjusted according to the actual situation and your special needs.
The propeller is designed using a multi-dimensional optimization iterative method to improve propulsion efficiency and reduce propeller losses. Communication is the best way to solve problems. We will reply and solve the problem for you as soon as possible. Its handle can be freely adjusted according to the actual situation and your special needs. The clamps are more durable and.
Propeller Model(in): 3 leaves/10.6. Packing Size(cm): 1075518cm/42.1321.657.09inch. Head Size: 48cm14cm/18.90in5.51in.
Battery Model: 12V 100AH Batteries (Not Included). Please read the attached instruction manual completely before use. And pay particular attention to the safety instructions included. You have to prepare a boat-motor stand or hanging board on your boat. When adjusting the tilt angle of the motor, never put your hands between the shaft and the hull of the boat, you might be injured.
Please make sure you detach the motor before taking the boat out of the water. When mounting or detach in the motor, make sure that the battery is disconnected. Don't start the motor on the bank. If you want to test the motor, it should be done in the river. Don't use the motor when it stops coming out of water.When there is no water coming out of the motor, please stop using it immediately, and then check whether the pump impeller or the water outlet is blocked. The batteries and chargers are not included in the package. Please choose 12V 100AH batteries, the maximum power of 3 hours of s. The battery is not included, please prepare it at a local store. Please allow the slight color difference caused by the shooting light and 1-3 cm error due to manual measurement, and make sure you do not mind before ordering.
58LBS Thrust Electric Outboard Trolling Motor Boat motor for salt water. The trolling motor is made of pure copper, which has excellent electrical conductivity, thermal conductivity, ductility and corrosion resistance. Meanwhile, it can overcome huge water resistance to increase the speed of driving. Its angle, gear, and height can all be freely adjusted. It is suitable for a variety of small watercraft, such as fishing boats, dinghies, and inflatable boats.Great Durability: The trolling motor is made of pure copper, which has excellent electrical conductivity, thermal conductivity, ductility and corrosion resistance. High Efficiency: The trolling motor with a pure copper motor can overcome huge water resistance to increase the speed of driving and improve its efficiency. Non-deformable: The suspension bracket is made of high-strength aluminum alloy, which can ensure that the bracket is not deformed by repeated disassembly and installation.
Fin Streamline Design: When it collides with an object underwater, the design can protect the propeller that is running at high speed. Easy to Drive: The main rod is made of aluminum.
Its lightweight will not increase the entire weight of your boat and the difficulty of driving. Adjustable Depth and Angle: Its depth and angle can be freely adjusted according to the actual situation and your special needs. Adjustable Gears: The fixed tiller has 5 forward and 3 reverse speeds. You can smoothly switch the speed and change the direction during driving. Real-time Monitoring of Power: The top of the thruster has a real-time display of the battery power, allowing you to check the power situation any time and prepare for charging in advance to avoid running out of power in the middle of the voyage.
Propeller Design: The propeller is designed with a multi-dimensional optimization iterative method to improve propulsion efficiency and reduce propeller losses. High Power Battery Clamp: The clamp is more durable and wear-resistant under high currents. And they have good conductivity.
Circuit Breaker Protector: The trolling motor with overload, short-circuit, and under-voltage protection settings can protect wiring and power. The trolling motor is suitable for a variety of small watercraft, such as fishing boats, dinghies, and inflatable boats. Net Weight: 9.5kg(20.94lb). Propeller Model(in):3 Leaves/10.6.
Packing Size(Cm):1014616CM(39.7618.116.29inch). Gross Weight: 11.5kg(25.35lb). Choose 12v 150a Batteries, the Maximum Power of 3 Hours of Sustainable Operation. Tear off the sticker at the spring on the handle.Take out the handle, and align the handle with the interface at the inner shell of the handle. Press the handle spring with one hand and push the handle in with the other hand. After a crunching sound is heard, the handle is installed. Take out the cylindrical card pin and insert it into the round hole of the drive rod (note that the length of both ends needs to be consistent).
Align the back of the propeller with the card slot and the card pin horizontally, and then tap into the propeller with force. Put in the card flap, then screw the nut to complete the installation. Take the fins out of the box and insert them into the fin slot. Put the included screws into the screw holes of the fins and put the nuts into the other end. Then tighten the screws with the Phillips screwdriver.Please read the attached manual completely before use. Don't use the motor when no water comes out of it, and then check whether the pump impeller or the water outlet is blocked. Do not switch gears too quickly. You should switch from one gear to another. Be sure the switch is in the OFF position before the connection to the battery. Always disconnect power when replacing the propeller, removing debris around the propeller, charging batteries, transporting a boat, or when the motor is not in use. Remember always disconnect from batteries once the motor leaves water as a rotating propeller can cause personal injury. Electrical arcing near the battery could ignite hydrogen gas and cause the battery to explode. Please wash the motor with freshwater, so that it can greatly reduce the possibility of corrosion. All trolling motors have noise. And the noise of this motor is the same as a motorcycle, which is normal. The machine itself is very light and can be used on boats under 100kg with a load capacity of 4 people, but the load capacity will affect the speed. So if you have a high-speed operation requirement, please note in particular. You must prepare a boat motor bracket or lifting board on your boat. The battery is not included in the package. Please choose 12V 150A battery so that the maximum power can be guaranteed for 3 hours of continuous operation. Feedback is very important to us. It is impossible to address issues if we do not know about them! Please keep the original box or packaging within 15days since item received. Your satisfaction is our ultimate goal. We work hard to earn your trust and future business. A If you receive a defective item, you may return it or ask for a discount.
Due to time zones, our reply to your questions may not be immediately. If it's non-workdays, please kindly be patient and wait till Monday. This item is in the category "Vehicle Parts & Accessories\Boats Parts & Accessories\Boat Engines & Motors". The seller is "wehaveuneed" and is located in this country: GB. This item can be shipped to all countries in Europe.